How To Mount A 65 Inch Tv By Yourself? | Do Mounting In 5 Steps

If you have something that needs to be hung on the wall with some space to spare. Then why not spruce things up with a television? For years, a substantial curved TV will act as a conversation starter and allow greater viewing angles. Unfortunately, however, this might be more headache than it’s worth. When faced with all of the mounting challenges. Like figuring out how to mount a 65 inch TV by yourself. It could get kind of awkward if that TV falls from your wall. But I’m here today to ease your mounting fears.

Although mounting a TV that size is no easy task. It’s important to know what the best tools and parts to use are in order to have everything go as smoothly as possible.


In this post, you’ll find all of the information you need, what products and equipment are required, and detailed step-by-step instructions on how to mount a 65 inch TV by yourself. (including where the best location is located).

You’ll also find answers to some commonly asked questions and hopefully learn a few tricks of your own!

Also Learn: How Much Does It Cost To Mount A 65 Inch TV? | Figured Out In 2022

How To Mount A 65 Inch TV By Yourself?

In this guide, I will help you understand how best to install your TV. I aim to provide you with all the knowledge necessary. So that your installation goes smoothly and without any unwanted interruptions.


Make sure to follow all the guidelines carefully. Once you have connected your 65-inch TV and it is working, test out what it can do once it is up and running.

What Tools Will Be Required To Mount 65 Inch TV?

You’re going to need a screwdriver – to ensure the TV mount is compatible with a standard screwdriver. You might also want a hammer in case you face walls where anchors may prove necessary – this way; you don’t have to head out specifically for specialty tools.

There are three wooden drill bits included, and these are explicitly meant for boring holes into the framing studs. The stud finder helps locate where they are in your wall, so that’s another commodity that might also come in handy.


Next is a measuring tape because it keeps everything straight and accurate, and lastly, you’re going to need some paper and pencil so as to markdown or sketch out where each piece of your TV mount should be installed depending on how big or small your screen is.

As an extra note, I recommend grabbing as many varying types of sockets as possible – there’s no saying what sizes some bolts will be!

Step-by-step Guide On How To Mount A 65 Inch TV By Yourself?

Step 1: Determine The VESA

Having a VESA-compatible TV mount is vitally essential to ensure that it can work effectively. The first step is to figure out if your TV has the right size VESA holes so that you can use and buy the right bracket for your product.

Step 2: Choose The TV-Compatible Hardware:

When installing a TV, make sure you consider the size of the bolts for any hardware. To install it in specific spots on the wall. Also, make sure to handle all of your components carefully to avoid damaging them.

When choosing hardware to mount your TV, make sure you find bolts long enough to securely and correctly hold your TV in place. But short enough not to damage it in the process.

Therefore, Check all of the bolts (M4, M6, M8) inside the threaded hole and choose the correct bolt size. You should also include spacer nuts to prevent collisions while using your bolts.

Step 3: Set Up Your Wall Plate:

Depending on the type of wall you’re installing your wall plate on, you’ll have to decide where to place it and how to attach it. If you have a brick or concrete wall, anchors can be used when putting up a wall plate.

If your walls are drywall, however. Then screws will need to be used in order for the wall plate to remain secure.

If using concrete or brick wall, you should first make sure that the track-mounted to your TV weighs the same as your flat-screen display.

The second step would be to determine where you want to hang your TV. And then mark its mounting holes with a level.

Next, you need to drill pilot holes of the required depth into the chosen locations. And carefully secure them in place by bolting them on.

For drywalls with Wood Studs, Securely position the wall plate at the desired height and line up the stud center with the holes. Using a stud finder, locate the studs and mark the edge and center locations.

Next, locate the center of your TV or projection wall mount and loosen its bolt to move it out of position overall. Once you have marked which holes will correspond with each of your tabs.

Cure your unit against one of these locations either by pre-drilling pilot holes. Through both layers of drywall or by attaching it to wood studs (if present). Fix them firmly to stable surfaces by tightening them.

Step 4: Fix Your TV To Your Wall Mount By Tightening It:

Use the wrench to adjust the TV bracket. First, make sure you have securely tightened the bolts. Next, adjust the angle and tilt of your television by loosening or tightening the cables.

Lastly, double-check that you’ve securely tightened everything after adjusting, so your television doesn’t move!

Frequently Asked Questions:

Is It Possible To Mount A TV Without Drilling?

Mounting your TV can be a challenge if you want to do it in a way that doesn’t involve drilling holes, but it’s not impossible.

An excellent method of installing a television set is using strong adhesive on the wall or brick surface. You could also use rail brackets and maybe brick clip-on hangers that are available in single or double amounts.

What Can I Do To Hide My TV Wires?

Better manage the cables in your home by working them with cable ties, labels, and new shorter cables (if needed). Use existing power sockets, and HDMI ports, or create a new one.

If your TV is wall-mounted, hide the TV cords in a new cord raceway or use existing ones instead.

Also, Learn:How Much Does Handy Charge To Mount A TV? | Let’s Know In 2022

Final Words:

A 65-inch curved TV makes an excellent and sophisticated addition to anyone’s home entertainment system! Using the steps mentioned in this article, you’ll be confident and proud to know How to mount a 65 inch TV by yourself. I hope you find this guide helpful as it will leave you feeling positive about tackling such a project.

Did this article change resolve your query? Did it trigger any questions and thoughts you’d like to share with me?

As the writer and creator of this article, I’ve been itching to know what you think since I put pen to paper. So, let’s connect – comment below if you have any questions!

Have fun!

Read Other Articles: How Much Does It Cost To Mount A 65 Inch TV? | Figured Out In 2022 Worried About Tv Falling Off The Wall? | Let’s Solve Your Problem! How Much Does Handy Charge To Mount A TV? | Let’s Know In 2022 Is My Tv Too Heavy To Mount? | What To Know About Your Tv? Plasma Tv Too Heavy To Mount | What To Do With It

Did You find Helpful This Post? Share with other