What To Do If The Tv wall mount Is Level But TV Is Not?

Are you searching for a solution to the problem if your TV wall mount is level, but TV is not? Don’t worry about TV not straight in a wall mount as this article will be giving you the best solution to deal with the mounting problems. Let’s have a look into it. 

A laser level is the most accurate technique to level a TV on the wall. A mirror is on one end of a conventional laser level, while a laser is on the other. The laser beam reflects off the mirror can adjust the TV until the shaft is horizontal.


The difficulty with this type of equipment is that if there is an obstruction in front, if there are several obstructions like Tv wall mount is level but tv is not, it will not operate. If your cabinets are close to the wall, for example, the laser may bounce around inside them, making it challenging to collect accurate readings.

Read more: How to Hang TV on Wall Without Mount Stand? - (Easy Ways to Hang Your New TV)

Things to do to Level your TV

If you don’t want to use a laser level but still want an accurate reading, use two levels instead of one (really just long pieces of wood or metal). Because it provides more information, this is a more objective approach to check if your TV wall is level, but TV is not.

 Please make sure both levels are fastened, so they don’t move about as you take measurements. Adjust your TV till it sits between those two locations after you have two separate points that are level with each other.


How to Get Your Television As Level As A Wall:

Since the arrival of flat-screen televisions, I’ve been asked numerous times how to make the TV level with the wall. One of the most prevalent complaints regarding flat-screen TVs is that they aren’t level. This tutorial will show you how to level your TV on a wall using three methods.

It can be tough to level your television on a wall. Even a one-inch tilt in a TV can provide an annoying viewability issue, especially when viewing sports or movies with horizontal lines. A bubble level is one approach to fix this problem, but let’s face it, most people don’t have one and are unlikely to get one for such a minor issue. 

The alternative option is to utilize trial and error by adding wood shims under the back feet until you get the desired results, but this can take a long time and cause your TV stand to warp. The third and most straightforward option is to use an adjustable wall mount.


Because you may modify the height of the mount instead of needing to line it straight on the first try, a high-quality tilt swivel wall mount with extensions will make this process much more manageable. Most TV mounts contain leveling adjustments on the TV mount itself, or at the very least at the bracket that connects the TV mount to the back.

Televisions Are Installed Upright But Viewed Sideways. How Does That Work?

Although televisions have permanently been installed and viewed vertically, you can watch them while lying on a couch or bed. According to the New York Times, government and industry standards have evolved to require televisions that you will install with their screens facing up.

Toshiba notes that the reason for this is simple: manufacturers need an air space between the screen and whatever it’s sitting on to avoid heat build-up behind it.

Even though most consumers don’t want vertical televisions, producers aren’t willing to give up on them entirely. Instead, firms like Toshiba provide some pointers on how we should all be watching our televisions in the first place: “Mount your TV on the wall and rotate it 90 degrees so you can watch it horizontally.”

How to hang a TV on the wall but you don’t have the proper tools or the time:

If you want to mount a television on the wall but don’t have the necessary tools or time, you’ll need to hunt for a good alternative. A practical and straightforward approach to ensure your television is level is to tape a little to the bottom. Here are ten terrific methods for making a TV appear level on the wall:

  • Position your television in the desired location. You might want to leave a few feet at either end so you can move it about while you’re putting up your walls.
  • Before drawing a line down the center of the television with chalk or another sort of paint marker, make sure it is as level as possible.
  • Use a spirit level to ensure that the line you drew down the center of your television is horizontal. If it isn’t, make the necessary adjustments until it is.
  • Now is the time to draw a line on your wall with your pencil to indicate you should put each side of your television against the wall (at the top, bottom, and sides).
  • Place a small piece of paper under one line of masking tape to protect the wall from any harm caused by hammering nails through it (your choice).

How to Make A TV Look Level On The Wall Without Getting It Level:

Use a laser level to level your TV on the wall without getting it level. Because you don’t want to screw into your TV and you don’t want to have to hold it up while you measure and mark your studs, leveling a TV on the wall might be difficult. When it comes to keeping studs, a laser level comes in handy.

Read more: How To Mount A Tv On A Plaster Wall Without Studs?-(Need to Know This)


We’ve learned all solutions related to the problem if your Tv wall mount is level but tv is not. You can also use tape marks to level a TV, not straight on the wall mount. Make tape markings on the wall at each stud location if you have a stud finder. After that, align your level with these tape marks to get your TV evenly placed on the wall. You’ll have less apparent mounting hardware if you utilize an offset bracket.

Read Other Articles: How Much Does It Cost To Mount A TV On A Brick Fireplace?-Quick Guide Can You Put A TV On A Chimney Wall?- Detailed Guide Can You Mount a 75 Inch TV on Drywall? – The Best Solution How To Mount A Tv On A Plaster Wall Without Studs?-(Need to Know This) Can You Mount a 65 inch TV on Drywall?-The Most Convenient Way!

Did You find Helpful This Post? Share with others